1. Oil selection

如果是一些年头较长的老车，活塞和汽缸壁之间的的缝隙会变大，可以选择粘稠一些的机油，来增强密封性。另外，机油品质也很关键，有条件的车主可以尽量选择质量合格的半合成机油或全合成机油，虽然保养成本会稍有增加，但它们的工作寿命更长，衰减慢，热稳定性和抗粘度变化的能力比较好。

If it is some older cars, the gap between piston and cylinder wall will become larger, you can choose viscous oil to enhance the sealing. In addition, the quality of engine oil is also critical. The qualified owners can choose semi-synthetic or full-synthetic engine oils as far as possible. Although the maintenance cost will increase slightly, they have longer working life, slow attenuation, better thermal stability and resistance to viscosity changes.

2 、新车避免激烈驾驶

2. Avoid violent driving.

通常而言，现在的新车是不需要刻意磨合的，但是前2000公里，发动机、变速箱等内部零件需要一个过程来达到较好的配合状态。在这个过程中，要避免地板油、高转速（超过4000转）等粗暴驾驶的行为。这样可以避免因发动机内部零件配合不好引起的烧机油。

Generally speaking, the new car does not need deliberate running-in, but the first 2000 km, engine, gearbox and other internal parts need a process to achieve better coordination. In this process, we should avoid the rough driving behavior of floor oil and high speed (more than 4000 turns). This can avoid burning oil due to poor internal parts of the engine.

3 、合理的按时保养

3, reasonable and timely maintenance.

合理的正常保养是必须的。机油的工作环境相当恶劣，就算全合成机油，如果长时间不更换也是不行的。另外，机油滤芯、空气滤芯也都非常重要，要按时更换，避免杂质进入气缸造成磨损。

Reasonable normal maintenance is a must. The working environment of the oil is very bad, even if the synthetic oil is not replaced for a long time. In addition, oil and air filters are also very important. They should be replaced on time to avoid the abrasion caused by impurities entering the cylinder.

出现了烧机油咋办？

What about burning oil?

确认是烧机油之后，那就需要及时进行检测维修了，如果因发动机故障（如活塞环密封不好、气门油封渗漏、缸垫渗漏等），应当尽快到维修站检查，尽早修复故障。

After confirming that the engine oil is burned, it needs to be inspected and repaired in time. If the engine fails (such as poor seal of piston ring, leakage of valve oil seal, leakage of cylinder gasket, etc.), it should be inspected at the maintenance station as soon as possible and repaired as possible.