There are some common ways to repair the old car's faults. In the long-term use of the car, there will inevitably be some small problems, small faults, let alone used cars. In particular, the tire and fuel consumption are large, and the brake system is prone to safety hazards. So, how to deal with these situations? Then I'll tell you the next car repair.

　　常见故障一:轮胎被异物刺破。

　　Common fault 1: the tire is punctured by foreign matters.

　　轮胎是容易磨损和损坏的地方。特别是在山路上行驶时总会有石子或钉子扎破轮胎，很多车主为了省事，到路边的修理店维修时还会继续赶路，其实这种方法只能权宜之计，高速行驶时会有很多隐患。建议业主找一家全职的修理厂进行内部修理，因为全职的修理厂会有专门的工具来拆卸轮胎，而且用专门设计的硫化机加热修理会更。

　　Tires are easy to wear and damage. Especially when driving on the mountain road, there will always be stones or nails puncturing the tires. In order to save trouble, many car owners will continue to rush to the roadside repair shop for maintenance. In fact, this method can only be a temporary solution, and there will be many safety hazards when driving at high speed. It is recommended that the owner find a full-time repair shop for internal repair, because the full-time repair shop will have special tools to dismantle the tire, and it will be safer to heat the tire with a specially designed curing press for repair.

　　常见故障二:油耗大大增加。

　　Common fault 2: fuel consumption greatly increased.

　　经过一段时间的使用，许多车主会突然发现燃油消耗量增加了10%，这是令人费解的。事实上，燃料消耗的增加也表明车辆有潜在的故障。这是为了了解燃料消耗增加的原因，然后加以解决。有许多因素导致燃料消耗量的增加。例如，离合器打滑会造成发动机转速损失，导致油耗飙升，需要更换离合器压盘和驱动轮。

　　After a period of use, many car owners will suddenly find that the fuel consumption has increased by 10%, which is puzzling. In fact, the increase in fuel consumption also indicates a potential failure of the vehicle. This is to understand the reasons for the increase in fuel consumption, and then solve it. There are many factors that contribute to the increase in fuel consumption. For example, the slipping of clutch will cause the loss of engine speed and fuel consumption soaring, so the clutch pressure plate and driving wheel need to be replaced.

　　常见故障三:制动系统故障。

　　Common fault 3: brake system fault.

　　制动系统故障包括:制动踏板行程过大，制动动作缓慢，制动效率很低甚丢失，制动距离增大。有三种方法可以排除此问题。连续按下刹车踏板，如踏板逐渐上升并有弹性感觉，但停一会儿后再按下踏板时仍很低，即是刹车系统内的空气，此时应刹车系统进行排气。单脚刹车不工作，但是连续踩几个踏板的刹车效果很好，一般来说，刹车踏板的自由行程太大或者刹车间隙太大。调整踏板的自由行程，检查刹车间隙，必要时修复刹车拆卸。如何判断轮胎是否需要更换

　　The brake system faults include: the brake pedal stroke is too large, the brake action is slow, the brake efficiency is very low or even lost, and the brake distance is increased. There are three ways to eliminate this problem. Press the brake pedal continuously. If the pedal rises gradually and feels elastic, but it is still very low when pressing the pedal after a while, that is, the air in the brake system. At this time, the brake system should exhaust. The single foot brake does not work, but the brake effect of continuously pressing several pedals is very good. Generally speaking, the free travel of the brake pedal is too large or the brake clearance is too large. Adjust the free travel of the pedal, check the brake clearance, and repair the brake disassembly if necessary. How to judge whether the tire needs to be replaced

　　此外,汽车保养小贴士汽车各种各样的小缺点,老板不应忽视,这是提醒你汽车的隐藏的缺点,及时解决或更换,不仅保护汽车的,而且还延长汽车的使用寿命。所以，请认真对待。

　　In addition, car maintenance tips: the boss should not ignore all kinds of small defects of the car. This is to remind you of the hidden defects of the car, and solve or replace them in time, not only to protect the safety of the car, but also to extend the service life of the car. So, please take it seriously.

　　你知道以上的汽车保养你的旧汽车常见故障的维修方法的具体内容,我相信你有进一步的了解,希望你能学习在未来的应用,如果你想知道更多的知识,请继续关注我们。

　　You know the specific content of the above maintenance methods for common faults of your old car. I believe you have a further understanding. I hope you can learn the application in the future. If you want to know more, please continue to pay attention to us.