宝马维修中常见故障灯亮处理方法进入电子化时代的汽车已经对全车控制有了长足的进步,车辆的各种状态都会以指示灯的形式显示在仪表盘上,并且在装配有多功能显示屏的车上还会有相应的文字信息提示。
济南宝马汽车专修小编为大家整理出常见的故障灯亮的处理方法:
In the era of electronics, cars have made significant progress in controlling the entire vehicle. Various states of the vehicle are displayed in the form of indicator lights on the dashboard, and there are corresponding text message prompts on vehicles equipped with multi-functional displays. Jinan BMW Automotive Professional Repair Editor has compiled common troubleshooting methods for malfunction lights:
1.宝马发动机故障灯
1. BMW engine fault light
发动机故障灯--发动机运行平稳性、动力性能、环保性能;常见原因是由于燃油品质引起,联系工作人员。
Engine fault light - engine running smoothness, power performance, and environmental performance; The common reason is due to fuel quality. Please contact the staff.
2.宝马胎压报警
2. BMW tire pressure alarm
轮胎缺气或气压过高,或更换了轮胎------切忌轮胎缺气行驶;建议养成每天早上行车前先检测四轮胎压的习惯。
If the tire is out of air or the air pressure is too high, or if the tire has been replaced - do not drive with a tire out of air; It is recommended to develop the habit of checking the four tire pressures before driving every morning.
3.宝马刹车片报警
3. BMW brake pad alarm
制动片已达磨损极限,请尽快到维修厂进行检测更换。
The brake pads have reached their wear limit. Please go to the repair shop for testing and replacement as soon as possible.
4.宝马刹车辅助系统报警
4. BMW brake assist system alarm
ABS,ESP报警-低速驾驶,谨慎驾驶;尽快去维修厂检查。
ABS, ESP alarm - low speed driving, cautious driving; Go to the repair shop for inspection as soon as possible.
5.宝马电瓶报警
5. BMW battery alarm
电瓶缺电。或者发电机不工作或工作不良好;电瓶损坏;请联系服务人员。
The battery is out of charge. Or the generator does not work or works poorly; Battery damage; Please contact the service personnel.
6.宝马气压/液压系统报警
6. BMW pneumatic/hydraulic system alarm
气压/液压悬挂报警--立即停车,检查车身高度是否正常,请联系服务人员。
Pneumatic/hydraulic suspension alarm - stop immediately and check if the vehicle height is normal. Please contact the service personnel.
7.宝马机油液面报警
7. BMW oil level alarm
机油液面报警--立即停车,检查机油油量和发动机外部是否泄漏;请联系服务人员。
Oil level alarm - immediately stop the vehicle and check the oil level and whether there is any external leakage from the engine; Please contact the service personnel.
8.宝马雨刮液面报警
8. BMW wiper fluid level alarm
雨刮液不足,请添加合适的雨刮液。
Insufficient wiper fluid, please add suitable wiper fluid.
9.宝马水箱液面报警
9. BMW water tank level alarm
水箱液面报警/水温过高--立即停车,联系4S店服务人员;切忌继续行车,检查冷却液是否缺损的时候,切记不要拧开冷却液水壶盖。
Water tank level alarm/high water temperature - stop immediately and contact the 4S store service personnel; Do not continue driving. When checking for coolant defects, do not unscrew the cap of the coolant water bottle.
10.宝马灯光报警
10. BMW light alarm
远光灯,近光灯,雾灯,驻车灯,示宽灯,弯道灯,转向灯,制动灯,倒车灯,尾灯,牌照灯等,出现故障都能引起灯光报警。
High beam lamp, low beam lamp, fog lamp, parking lamp, side marker lamp, bending lamp, turn signal lamp, brake lamp, reversing lamp, tail lamp, license plate lamp, etc. can cause light alarm in case of failure.
In short, as long as you understand the meaning of these indicator lights, you can know what is wrong with your car and how to handle it. For more related matters, come to our website http://www.lutongqixiu.com Consult!