There are two maintenance methods for automatic transmission failure:

1.用户车辆变速箱出现故障后，由维修站自行解决问题;这是我们通常所说的“维修”;这种方法可以就地解决，但质量得不到保障，如果由于质量再次出现问题，会造成时间上更大的浪费，甚有时需要更换的零件不能及时到位，造成客户非常不满意，这必然会造成对汽车和维修站声誉的严重影响;

1. After the gearbox of the user's vehicle fails, the maintenance station shall solve the problem by itself; This is what we usually call "maintenance"; This method can be solved locally, but the quality can not be guaranteed. If the quality problems occur again, it will cause a greater waste of time, and sometimes the parts that need to be replaced can not be in place in time, resulting in great dissatisfaction of customers, which will inevitably have a serious impact on the reputation of automobile brands and maintenance stations;

2.由变速箱厂对故障变速箱进行“维修”或称“再制造”。根据客户要求，当变速箱有故障时，客户可选择将变速箱运到厂，修复后再寄回，也可以选择直接换一个由厂“再制造”的变速箱总成。这个方案在质量和上都更有保证。

2. "Professional maintenance" or "remanufacturing" of the faulty gearbox shall be carried out by the professional gearbox factory. According to the customer's requirements, when the gearbox fails, the customer can choose to transport the gearbox to the professional factory and send it back after repair, or directly replace it with a "remanufactured" gearbox assembly by the professional factory. This plan is the most guaranteed in terms of quality and price.

由变速箱维修厂对变速箱进行“维修”或“再制造”的优势：

Advantages of "professional maintenance" or "remanufacturing" of gearbox by professional gearbox maintenance factory:

(1).自动变速箱维修需要大量的设备。自动变速箱由于其结构紧凑，配合精密，技术含量高，所以必须依靠专门设备才能对其内部零件进行修复，例如变扭器等部件，另外在每个操作工序也要依赖仪器进行精que检测，这些仪器设备并不是普通维修站所配备的;

(1). Automatic transmission maintenance requires a lot of professional equipment. Due to its compact structure, precise coordination and high technical content, the automatic transmission must rely on special equipment to repair its internal parts, such as torque converter and other components. In addition, it also depends on instruments for fine detection in each operation process. These instruments and equipment are not equipped in ordinary maintenance stations;

(2).需要有经验的高素质人才。由于自动变速箱技术新异，普通修理技工难以掌握，而且接触机会也很少。而厂配备了这方面高要求的人才，也有很好的学习和培训机会，对此专项工作能很快积累经验，保证维修和制造质量;

(2). We need experienced and high-quality talents. Due to the new technology of automatic transmission, it is difficult for ordinary repair technicians to master, and there are few contact opportunities. The professional factory is equipped with highly required talents in this field and has good learning and training opportunities. In this special work, we can quickly accumulate experience and ensure the quality of maintenance and manufacturing;

(3).配件方面。厂很容易配备各种自动变速箱的所有配件，省却维修的待件时间。另外厂可采购OEM变速箱零件，大大降低维修成本。另一方面，由于每个变速箱故障原因不同，损坏部件也不同，由厂进行整理归类，可以充分利用变速箱上有用的零部件，节约资源，保护环境。

(3). Accessories. Professional factories can easily equip all accessories of various automatic transmissions, saving the waiting time for maintenance. In addition, professional factories can purchase OEM gearbox parts, which greatly reduces the maintenance cost. On the other hand, due to the different failure causes of each gearbox, the damaged parts are also different. They are sorted and classified by professional factories, which can make full use of the useful parts on the gearbox, save resources and protect the environment.