磨合期

　　Break in period

　　磨合期咱们应留意发起机转速最好不超越4000转(包含发起机空转)。切忌急加快和急踩刹车。BWM的磨合期为7500公里，在7500公里内因为缸筒和活塞的合作还没有到达最好状态，所以机油耗费会略大一些，故在磨合期内不做机油耗费的评估。10000公里今后您做完首保，便能够自在奔驰了。

　　During the running in period, we should pay attention to the engine speed, preferably not exceeding 4000 revolutions per minute (including engine idling). Do not accelerate or apply the brakes too quickly. The running in period of BWM is 7500 kilometers. Due to the cooperation between the cylinder and piston not reaching the best state within 7500 kilometers, the oil consumption will be slightly higher, so no oil consumption assessment will be conducted during the running in period. After completing the first maintenance after 10000 kilometers, you will be able to drive freely.

　　机油耗费

　　Oil consumption

　　发起机在运行时，因为发起机机油具有光滑、冷却、密封，清洗及防止腐蚀和油泥沉积的特性，发起机内一切部件都要靠机油进行光滑和冷却，所以光滑油膜随发起机作业而损耗，故机油会有相应耗费。一起机油还有清洗，防腐蚀和防止油泥沉积的作用所以要定时替换机油。BMW的机油耗费的规范是0.7L/1000km，低于国家机油耗费规范。

　　When the engine is running, due to the characteristics of smooth, cooling, sealing, cleaning, and prevention of corrosion and sludge deposition of the engine oil, all components inside the engine need to be smoothed and cooled by the engine oil. Therefore, the smooth oil film is lost during the operation of the engine, and the engine oil will be correspondingly consumed. The oil also has the functions of cleaning, corrosion prevention, and preventing sludge deposition, so it is necessary to replace the oil regularly. The oil consumption standard of BMW is 0.7L/1000km, which is lower than the national oil consumption standard.

　　刹车

　　Brake system

　　一般车辆行进20000~30000公里为刹车片一级报警阶段，提醒您留意并查看。假如要跑长途则需求您特别留意行进路程。行进30000~40000公里时，刹车片已磨损到极限，需求替换（外表上会有提示灯提示替换刹车片）。

　　The first level warning stage for brake pads is when a vehicle travels between 20000 and 30000 kilometers, reminding you to pay attention and check. If you want to run a long distance, you need to pay special attention to the distance traveled. When traveling 30000-40000 kilometers, the brake pads have worn to the limit and need to be replaced (there will be a warning light on the surface indicating the need to replace the brake pads).

　　胎压

　　Tire pressure

　　内行进过程中，轮胎胎压丢失0.5bar摆布时胎压就会报警，提示您查看胎压。假如您的车胎胎压报警，请赶快查看胎压（规范胎压坐落司机门门柱处），如发现有轮胎压力低时，需求查看是不是有漏气，并铲除胎压灯（见运用手册），假如重复报警，请当即到维修基地查看

　　During the internal process, if the tire pressure drops to around 0.5 bar, the tire pressure will sound an alarm, prompting you to check the tire pressure. If your tire pressure alarm is triggered, please check the tire pressure as soon as possible (the standard tire pressure is located at the driver's door pillar). If you find that the tire pressure is low, you need to check for air leakage and remove the tire pressure light (see the user manual). If the alarm is repeated, please go to the repair base immediately to check

　　本文来自：济南宝马汽车专修 更多精彩内容请点击我们的网站：http://www.lutongqixiu.com 我们将倾情为您解答。

　　This article is from: Jinan BMW Automotive Repair. For more exciting content, please click on our website: http://www.lutongqixiu.com We will wholeheartedly provide you with answers.