磨合期初期，车辆的里程一般在500以下，此时时速不要过快，保持在60-70，转速不要超过2200转为。这样可以有效保护发动机，减少磨损。

　　In the early stage of the running in period, the mileage of the vehicle is generally below 500 kilometers. At this time, the speed should not be too fast and should be maintained at 60-70 kilometers per hour. The optimal speed should not exceed 2200 revolutions per hour. This can effectively protect the engine and reduce wear.

　　磨合期中期，里程达到500-1000左右，时速可以提升到90-100，转速保持在2500转以下为。这个阶段的磨合可以促进发动机和其他部件的适应和配合，进一步提高汽车性能。

　　In the middle of the running in period, the mileage can reach around 500-1000 kilometers, and the speed can be increased to 90-100 kilometers per hour. It is best to keep the RPM below 2500 rpm. This stage of running in can promote the adaptation and coordination of the engine and other components, further improving the performance of the car.

　　磨合期后期，里程达到1000-1500左右，时速可以逐渐提升到120以下，但要注意转速不要超过3000转。磨合期的后期需要循序渐进地发展，以确保汽车各个部件的适应和磨合效果。

　　In the later stage of the running in period, the mileage reaches about 1000-1500 kilometers, and the speed can gradually increase to below 120 kilometers per hour, but it is important to note that the speed should not exceed 3000 revolutions per hour. The later stage of the running in period needs to be gradually developed to ensure the adaptation and running in effect of various components of the car.

　　以上是关于 济南沃尔沃汽车专修 的介绍，若想了解相关知识可请点击：http://www.lutongqixiu.com 我们将会全心全意为您提供满分服务，欢迎您的来电！

　　The above is an introduction to Jinan Volvo Car Repair. If you want to learn more about related knowledge, please click: http://www.lutongqixiu.com We will wholeheartedly provide you with full score service. Welcome to call us!