对于汽车来说刹车系统很重要，从组成来看刹车系统主要有三部分，分别是操纵系统、液压系统、助力系统，驾驶车辆的过程中要注意刹车系统，那么刹车不灵敏了要踩很深怎么解决？
济南奔驰汽车维修厂家在此讲解4点。
The brake system is very important for cars. From the composition, the brake system mainly consists of three parts, namely, the control system, the hydraulic system, and the power assist system. Pay attention to the brake system when driving the car. How to solve the problem if the brake is insensitive and you step on it deeply? Jinan Benz auto maintenance manufacturer will explain 4 points here.
1、检查刹车油壶，尤其是刚更换了刹车油，因为刹车管路中的空气没有排干净，导致刹车壶里有空气，这样车辆刹车的时候就会感觉不灵敏。建议到4s店进行处理，将空气排出才可以。
1. Check the brake oil reservoir, especially the brake oil that has just been replaced. Because the air in the brake pipe is not completely discharged, there is air in the brake oil reservoir, which makes the car insensitive when braking. It is recommended to go to the 4S store to have the air removed.
2、刹车片容易磨损，一旦出现了严重的磨损，整体的厚度就会变薄，这样一来驾驶车辆的时候就需要深踩，也就是踩的很深才可以达到原有的制动效果，这个情况需要更换刹车片。
2. The brake pads are easy to wear. Once serious wear occurs, the overall thickness will become thinner. In this way, you need to step deeply when driving the vehicle, that is, you can achieve the original braking effect by stepping deeply. In this case, you need to replace the brake pads.
3、刹车油不足的话也会造成刹车不灵敏，这个情况需要检查一下，主要看一下刹车油壶内的刹车油液是不是在min和max刻度之间，如果刹车油低于min刻度的话，就表示刹车油不足，这个情况需要及时添加刹车油，才可以。
3. If the brake oil is insufficient, it will also cause the brake to be insensitive. This situation needs to be checked, mainly to see if the brake oil in the brake oil pot is between the min and max scales. If the brake oil is lower than the min scale, it means that the brake oil is insufficient. In this case, you need to add brake oil in time.
4、真空助力泵是用来提供助力的，这个部件可以让驾驶员轻松踩下刹车踏板。踩下刹车踏板后，制动总泵会通过制动液来推动制动分泵，此时制动分泵可以推动刹车片夹紧刹车盘，这样汽车就可以减速了。制动分泵就是我们平时所说的刹车卡钳，刹车卡钳内是有很多活塞的，这些活塞的作用是推动刹车片。
4. The vacuum booster pump is used to provide power assistance, which allows the driver to easily step on the brake pedal. After stepping down the brake pedal, the brake master cylinder will push the brake wheel cylinder through the brake fluid. At this time, the brake wheel cylinder can push the brake pad to clamp the brake disc, so that the car can decelerate. The brake wheel cylinder is what we usually call the brake caliper. There are many pistons in the brake caliper, which are used to push the brake pads.
We have already explained how to deal with the problem that the brake is not sensitive and needs to be pressed deeply. You can come to our website at any time for any doubts or needs http://www.lutongqixiu.com Ask about it!
