The car is pasted with a special film that meets the standard. Theoretically, it has the functions of resisting ultraviolet rays, heat insulation, protecting privacy in the car, explosion-proof, anti glare and so on.

1、抵挡紫外线

1. Resist ultraviolet light

前挡贴膜后抗紫外线率能达到99.9%，大大减少了仪表台装潢、内饰件退色的可能性，防止紫外线对车主身体的伤害。

The anti ultraviolet rate of the front bumper film can reach 99.9%, which greatly reduces the possibility of fading of instrument panel decoration and interior trim, and prevents ultraviolet damage to the body of the owner.

2、隔热

2. Insulation

防爆膜能有效隔热，减少空调运作，减少油耗。

Explosion proof membrane can effectively insulate heat, reduce air conditioning operation and reduce fuel consumption.

3、保护车内隐私

3. Protect privacy in the car

还能保护车内隐私，外面看不清楚车里面的人在干什么事情。

It can also protect the privacy in the car. You can't see clearly what the people in the car are doing outside.

4、防爆

4. Explosion proof

好的膜能起到防爆的作用，在事故时，减少玻璃破裂飞溅。

A good film can play an explosion-proof role and reduce glass cracking and splashing in case of accident.

5、防眩光

5. Anti glare

太阳膜的防眩光性，指的是可以有效地减弱刺目的昡光。这就为车主朋友们创造了良好的驾驶视野，缓解驾驶疲劳，提高驾驶安全。

The anti glare property of solar film refers to that it can effectively reduce the glare. This creates a good driving vision for car owners, alleviates driving fatigue and improves driving safety.

前挡玻璃到底要不要贴膜？

Is there any film on the front windshield?

那其实轮谷个人不太建议前挡玻璃贴膜，主要理由如下：

In fact, Lungu doesn't recommend the front windshield film. The main reasons are as follows:

1、前挡贴膜影响透光率，视线不好，尤其是晚上，对视线的影响大。

1. The front bumper film affects the light transmittance and poor vision, especially at night.

毋庸置疑，前挡风良好的透视性对于车主开车非常重要。

There is no doubt that the good perspective of the front windshield is very important for car owners to drive.

根据国家标准，汽车前挡玻璃透光率不得低于70%。普通汽车前挡玻璃自身透光率为75%上下，因此前挡贴膜必须达到90%的透光率，才可能使前挡贴膜后的透光率依然超过70%，才能符合国家规定。

According to national standards, the light transmittance of automobile front windshield shall not be less than 70%. The light transmittance of the front windshield of an ordinary car is up and down 75%, so the front windshield film must reach a minimum light transmittance of 90%, so that the light transmittance after the front windshield film can still exceed 70%, so as to meet the national regulations.