相信大家对雨刮器都有一定的了解,顾名思义就是为了缓解雨天对行车视线的影响。那些有些朋友就会问,到底雨刮器怎么用的呢,下面我们就给大家一个雨刮器开关使用图解吧。
I believe that everyone has a certain understanding of the wiper, as the name implies, is to alleviate the impact of rain on the driving line of sight. Those some friends will ask, in the end, how to use the wiper, let's give you a wiper switch diagram.
A:调节旋钮
A: Adjusting knob
B:前雨刮点动操作(MIST),向上推动控制拨杆到MIST 位置,随之就会自动回位并且雨刮器刮动一次。
B: The front wiper inching operation (MIST), push up the control paddle to the position of mist, then it will automatically return to its original position and the wiper will operate once.
C:前雨刮关闭(OFF)
C: Front wiper off
D:自动雨刮(AUTO),转动调节旋钮可以改变雨量传感器雨刮器控制的灵敏度,从而调节雨刮器的刮刷频率。
D: Automatic wiper (auto), turning the adjustment knob can change the sensitivity of rain sensor wiper control, so as to adjust the wiper frequency.
E:低速刮刷(LOW)
E: Low speed wiper (low)
F:高速刮刷(HI)
F: High speed wiper (HI)
G:前风窗玻璃洗涤,向驾驶员方向轻拉控制拨杆,挡风玻璃洗涤器和雨刮器就会同时工作。当洗涤器停止工作后,雨刮还会继续工作一小段时间。
G: To wash the windshield, gently pull the control lever towards the driver, and the windshield washer and wiper will work at the same time. When the washer stops working, the wiper will continue to work for a short time.
那么有些车型的玻璃水开关是通过实体按钮控制的,通常都是位于方向盘左侧/右侧控制杆上的外侧,只要按压下去就会喷出玻璃水,同时雨刮器也会同时工作的。但如果发现玻璃水没有喷出,只是雨刮器工作的话,千万不要继续按压按钮了,这时候就得看看玻璃水报警灯有没有亮起,有的话应及时补充玻璃水。
Then, the glass water switch of some models is controlled by a solid button, which is usually located on the outside of the left / right control lever of the steering wheel. As long as it is pressed down, the glass water will be ejected, and the wiper will also work at the same time. However, if it is found that the glass water does not spray out, and only the wiper is working, do not press the button any more. At this time, it is necessary to check whether the water glass alarm light is on. If there is any, the glass water should be replenished in time.